Suzhou High Precision CNC Vertical Machining Center with Standard

• Customization: Available
• After-sales Service: 12 Month
• Warranty: 12 Month
• Model NO.: LK5025
• Transport Package: Wooden Box Packing
• Specification: LK5025
• Trademark: Longkai
• Origin: Suzhou, China
• HS Code: 8456301090
• Production Capacity: 1000/Year

Product Description

Structural performance of machine tool
1. Fuselage design
The fuselage and saddle are reinforced by mountain shaped ribs, with the shortest force streamline, ensuring the best rigidity of the fuselage.
Based on the excellent engineering design, the stiffeners of the base and column of the machining center can resist the torsion and damping, and transfer the cutting vibration to non
Cutting area. The column is designed with torque tube, which can provide excellent rigidity, bending and torsion resistance Ultra wide base design,
At the same time, lower the center of gravity of the base and adjust the center of gravity of the machine tool to the best stable height. The span at the bottom of the column is widened to improve the stability of the machine tool.

2. spindle head
The contact length ratio between the main shaft and the column is appropriate to provide stable support for the main shaft. Independent cooling system is built in the spindle head to stabilize the spindle continuously
The head heat is in a reasonable range, which reduces the thermal extension of the spindle and ensures the machining accuracy.

3. counterweight
In response to the processing requirements of different models, the following counterweight methods are adopted:
Counterweight: low failure rate and long service life;
Nitrogen counterweight: rapid action, no noise, greatly improved processing accuracy, increased machine life;
No counterweight: in order to meet the requirements of high speed and high sensitivity processing, the machine tool adopts the method of no counterweight, and enhances the requirements of servo motor and screw,
Z-axis with brake, to ensure the accuracy of the machine tool is stable and lasting, and increase the service life.

4. screw rod
It adopts imported grinding level pre drawn double nut screw rod to eliminate reverse clearance. After heat treatment, it has high rigidity, wear resistance, torsion resistance and long service life, which guarantees high machining accuracy of the machine.

5. AC servo motor
Adopt original imported from Japan, super high performance servo motor, provide stronger power when heavy cutting.
In the case of low feed, high torque can still be maintained.
Higher than 10000 (pixel) resolution and closed-loop position feedback ensure high accuracy.
High quality coupling ensures that the screw rod moves with the axis of the motor.

6. Lubrication system
The whole machine adopts a positive displacement lubrication system and a de pressurized oil pump, with stable pressure and flow, which effectively transports the oil to each lubrication point and provides uniform forced lubrication for each slide surface, so as to ensure the accuracy and service life of the machine tool.

7.Chip remover system

Model	LK-5025
Y-axis Travel mm	2500
Z-axis Travel mm	1000
Spindle end to table mm	260*1260
Spinde speed rpm	4000/6000
Spindle motor power kw	25
Three axis motor power kw	X7/Y4.5/Z4.5
Table area mm	2300*5000
T-groove (groove * width*center distance)mm	11-28*200
X-axis rapid displacement mm/min	10000
Y-axis rapid displacement mm/min	10000
Z-axis rapid displacement	10000
feed rate mm/min	1-5000
Spindle taper	BT50
Prop quantity	80
Maximum tool diameter mm	300
Maximum tool length mm	315
Tool weight kg	25
Tool magazine category	Disc type
Air pressure source kg/cm	10
Bearing of worktable kg	6500
Machine tool weight kg	53000

Our main products :
* Servo Mid-speed WEDM machine
* Stepper medium speed wire cutting machine
* High efficiency fast Wire cutting
* CNC drilling machine
* Drilling EDM
* EDM molding machina
* Grinding machine
* Turret milling machine
* CNC drilling and milling machine
* CNC engraving and milling machine
* Vertical machining center
All the above products have passed CE, SGS certificates.

Our Strength:
* Over 12 years manufacturing experience in CNC lathe machine.
* The company abides by the concept of "providing high-quality,stable and cost-effective products and good services to the clients by relying on advanced and reliable technology, 
* Always adheres to a large amount of research and development investment and continuous engineering improvement
* Longkai EDM machines are with high cutting accuracy, high cutting speed, high surface finish and high stability. 
* We have always been in the leading position of the reciprocating wire cutting machine, electrical processing power and control technology.

After-sale Services:
Warranty is one year.
We would offer the parts (quality problem) free of charge during this period, freight collect.